Search:     Advanced search

MC156 - First Atlanta - Sandy Springs - Printer Installation (Mac)

Article ID: 4
Last updated: 19 Sep, 2016
KWFA - MC156 - Printers Quick Guide
Device IP Address Driver
Savin 01 172.16.16.159 SAVIN MP C4503
Savin 02 172.16.16.77 SAVIN MP C4503
Savin 03 172.16.16.30 SAVIN MP C2504
Savin 04 172.16.19.245 SAVIN MP C3502
Driver Bundle 156_Savin1-2.pkg
Driver 156_Savin3.pkg
Driver 156_Savin4.pkg
1. Please download the files at the bottom or top of this article. These are the drivers for Savin 1, 2, 3 and 4.

2. Once downloaded, find each in your Downloads folder on your Mac (Click on Finder, then Downloads).

3. Double click on the 156_Savin1-2.pkg file and follow the prompts to install the printer driver. Repeat for 156_Savin3.pkg and 156_Savin4.pkg.

4. Once installed click on System Preferences. Click on Printers & Scanners.

5. Click on the + sign in the bottom left corner of that window and then click on IP (3rd tab up top).

6. In the Address field type in 172.16.16.159, change/leave Protocol to Line Printer Daemon - LPD and leave Queue blank.
Picture
7. Once the printer is found change the Name field to Savin 1 (or KW_Savin 1, up to you), Location field is optional (could be something like KW office). Make sure under Use field the driver ends in PS, eg. Savin MP C4503 PS. This is crucial, if it says AirPrint, change it to the PS driver. Click on Add. On the next page click on Next and it should be installed.

8. Repeat steps 6 and 7 changing the Address field each time to 172.16.16.77, then to 172.16.16.30 and finally to 172.16.19.245. These are the addresses for Savin 2, Savin 3 and Savin 4 respectively (Savin 4 is on the other side of the street). Make sure and change the Name accordingly with each iteration.

9. Once installed launch any program (TextEdit would do but do NOT use Chrome or Adobe Reader) and select FilePrint. This will invoke the print dialog.

10. See attached photo and make the following changes following the instructions BELOW the picture.
Picture
10.1. Click on Printer and select Savin 1, remove the checkmark for Two-sided printing. (well, if you prefer two-sided, by all means keep it).

10.2. Click on the "TextEdit" menu (in this example TextEdit, could be Firefox, Safari, Word, etc) below Orientation and select Job Log, put a checkmark next to Enable User Code and then enter your office Print code. Ask your Agent Services Coordinator what your code is if you do not know it.

10.3. Click on Job Log below Orientation and select Printer Features. Now click on Presets at the top and choose Save Current Settings as a Preset. Name the Preset - Color. Now change the Color Mode at the bottom (2nd from bottom) to Black and White. Click on Presets again and select the same Save Current Settings as a Preset. This time name the Preset - BW.

10.4. Now choose the Printer at the top of the Print Dialog and select Savin 2, repeat 10.1, 10.2 and 10.3 for it. Repeat this step for Savin 3 and Savin 4.

Going forward make sure to Always select BW or Color preset to print, otherwise it will not print. The presets have the color selection and, most importantly, your print code
Article ID: 4
Last updated: 19 Sep, 2016
Revision: 18
Views: 0
Comments: 0
Print Export to PDF Subscribe Email to friend Share Add comment
This article was:   Helpful | Not helpful
Prev   Next
Printer Setup Guides     MC156 - First Atlanta - Sandy Springs - Printer Installation...